Zhongyuan Super Hard Tools Co.,Ltd

Zhongyuan Super Hard Tools Co.,Ltd

进入中文版  中文版 进入英文版  ENGLISH
Contact Us

Name: Ms Nina Qiao
Mobile: +86-15738374568
E-mail: zysuperhardtools@foxmail.com
Add: Economic and Technological Development Zone, Zhengzhou City,Henan Province, China
Skype: nina-superhardtools
QQ: 1912337285

Products > ND tools & inserts > Natural Single Crystalline Diamond Tools > SCD natural diamond tools for ophthalmic lens
Product name : SCD natural diamond tools for ophthalmic lens
 Enlarge Image                   Back
←[Previous Product]             


Details:
We provides exacting tooling to the ophthalmic lens manufacturing Industry.
We only use high quality De Beers diamond material.
Our manufacturing process is strictly controlled to ISO standards and above.
We provide a tool repair service which is fast and reliable to extend the service life of your tools.
Our team has a wealth of knowledge in Diamond tooling, mechanical engineering, optical generation, electronic engineering, systems integration.

Single-crystal diamond tools are used in a number of industries when surface finish is critical to the application. Because the cutting edge is made of one large diamond stone, the tool can be ground sharp to 10,000x magnification. Tolerances for SCD tools are typically much tighter and more controlled than for polycrystalline diamond tools.



Depth of Cut:  if the effect is not enough obvious when large cutting depth of processing, because it largely depends on workpiece material, depth of cutting and feed rate. If depth of cut is more than 0.02mm, don’t use the kind tools to process; it will be better that adopt the pcd tools to rough machining firstly, then using the SCD (natural diamond tools) to super precision.

 

Price: SCD (ND) tool performance than other advanced cutting tool, using the material to process can be obtained enormous economic benefits, but the price is very expensive, such as its price is 4 times more than pcd cutting tool, although the kind tools price is very high ,properly using the tool, it can reduce the machining process cost and greatly increased the production efficiency.


Loading and unloading: By far now Diamond is the most hard material, because extremely fragile, the sensitive thermal shock and the sharp blade, any impact (such as loading and unloading is not careful or fall to ground ) can make the blade appearing gap, crack or damage, so the operator should be training. In order to avoid blade slightly damaged, in commonly should be placed a thin film between diamond cutting tools and other components.


Related Products :
ND profile cutters

ND profile cutters
ND polishing cutters

ND polishing cutters
ND diamond side milling cutter

ND diamond side milling cutter
milling inserts

milling inserts
ND diamond milling tools

ND diamond milling tools
Natural diamond Tool for batch flower mirror finish

Natural diamond Tool for batch flower mirror finish
ND lathe inserts

ND lathe inserts
ND 0.4R turning milling inserts

ND 0.4R turning milling inserts

online service

Skype: nina-superhardtools 点击这里给我发消息